Even, hands-off delivery of your chosen serums as you microneedle.
A built-in reservoir holds the serum inside the cartridge, keeping product close to the needles and away from extra handling.
As the microneedling tip moves up and down, micro-channels are created and filled in the same pass, combining needling and infusion into one motion.
ProducAutomatic release supports a thin, even film along each track, helping reduce drips, wipe-off and product waste versus manual dripping.
PREP & CLEANSE
Cleanse and tone the treatment area, then pat the skin dry. Lay out the H2, cartridge and serum nearby, and check the device is charged and the tip is clean before use.
FILL & ATTACH
Open the cartridge and fill it with serum to the marked level, avoiding overfilling and air bubbles. Wipe off excess, then close and lock it onto the H2 until secure.
GLIDE & INFUSE
Switch on the H2 and select a comfortable speed. Move in straight, overlapping lines, keeping the tip in contact so channels and infusion happen in the same motion.
CLEAN & STORE
AAfter the session, power off the device and remove the cartridge. Discard any remaining serum, wipe the tip and handpiece, and store the H2 in a clean, dry place.
A simple three-step view of how the H2 cartridge creates channels and delivers serum as it moves. Microneedles work the surface while the cartridge releases product automatically, so channels and infusion happen together.
1
As the tip touches the skin and moves up and down, fine needles gently pierce the stratum corneum, creating even micro-channels across the treatment area.
2
With each stroke, serum flows from the built-in chamber through the tip, coating the surface and feeding those fresh channels without needing separate manual application.
3
Repeated passes allow serum to wick down through the channels from the surface into the upper layers of the epidermis, reaching closer to the basal layer while leaving a thin film on top for glide.
Download triLift Info Kit
